Floplast MDPE 25mm X 20mm X 25mm Reducing Tee (492125)

Floplast MDPE 25mm X 20mm X 25mm Reducing Cast Iron Style Tee

<Strong>Floplast'S</Strong>Wras Approved MDPE Systems Are Suitable For Use Below Ground On Cold Water Services With Polyethylene Pipes Manufactured In Accordance With The REqualuirements Of Bs En 12201 - 2 (Blue).

• High Impact Resistant Body And Nut Which Enables It To Absorb Thermal And Mechanical Stress.
• The Fittings Have A Co-Polymer Polypropylene Body, Body Nut And Guide Ring, Acetal Grab Ring And Nitrile Seal.
• Maximum Operating Pressure Is 16 Bar For 20mm Pipe. All Other Sizes Are 12.5 Bar.
• Tested And Approved By Various Testing Institutes Worldwide.
• Water Regulatons Advisory Scheme Approved (Wras) Product. 20mm To 63mm Range Of Fittings.
• All The Supreme™ Range Of Fittings Are Wras Approved To Resist Pressure Up To 16 Bar.
• Simple And Quick To Connectorect:

MDPE Fittings

• High Impact Resistant Body And Nut Which Enables It To Absorb Thermal And Mechanical Stress.
• The Fittings Have A Co-Polymer Polypropylene Body, Body Nut And Guide Ring, Acetal Grab Ring And Nitrile Seal.
• S16 Fittings Are Designed And Suitable To Be Used At A 16 Bar Pressure Rating.
• Operating Temperature -10°C +45°C