MUREXIN MS-K509 Contact Adhesive – 16KG
A one-component, permanently elastic adhesive based on MS technology. It contains no water or solvents, is odourless, and does not cause allergic reactions. It dampens impact sounds up to 14 dB according to DIN 52210. The adhesive hardens by absorbing moisture from the surrounding environment. The adhesive is intended for bonding all types of European and exotic wood floors, as well as engineered parquet on cement and anhydrite substrates, as well as on wooden substrates and wood-based panels, such as OSB boards after sanding. It is suitable for use with water underfloor heating. Primer is not required before using X-Bond MS-K509 adhesive. In the case of highly absorbent or insufficiently strong substrates, it is recommended to prime them using Murexin priming agents: polyurethane primer PU 5 or epoxy resin EP 70 BM or EP 90 with the addition of quartz sand. If the adhesive is used with underfloor heating, the substrate (after the heating cycle) should be primed with polyurethane primer PU 5 and covered with quartz sand.
Parquet installation can begin after approximately 24 hours. Adhesive residues on the parquet can be easily cleaned within 1-2 hours.
Consumption
Consumption: approximately 0.8-1.3 kg/m2, depending on the substrate roughness, the type of parquet being bonded, and the notched trowel used.
Additional Information:
- Notched trowel: B11, B13, B17, B3
- Working time: 45-50 minutes
- Parquet sanding: after approximately 2-5 days, depending on the climatic conditions at the construction site.”
- Pack Size: 16KG
- Colour: N/A
Delivery Costs
All delivery costs are given in the basket and during checkout after a delivery postcode is entered, this is because delivery costs are dependent on the products that you’re looking to purchase and where they need to be delivered to. Delivery costs are based on delivery to a single address within the UK Mainland, excluding the Scottish Highlands and Islands where additional costs may apply. Please see examples of our delivery costs below:
Example of delivery cost for products from FreeFlow Rainwater Systems and Soudal:
|
Small FreeFlow/Soudal Items: from £3.75 + VAT
(sealant, clips, unions and brackets etc)
|
|
Long FreeFlow Items: from £20.00 + VAT
(lengths of pipe and guttering etc)
|
Example of delivery cost for products from FloPlast, Polypipe, Brett Martin, Penosil:
|
Small Items: from £10.00 + VAT
(plumbing, drainage and rainwater fittings etc)
|
|
Long or Large Items: from £20.00 + VAT
(lengths/rolls of pipe, chambers and guttering etc)
|
|
Clear Amber Delivery: £30.00 + VAT
(Aluflow, Ambex etc)
|
We differentiate between small and large/long items, simply because an order containing large items or anything with a length to it, such as, chambers, rolls of pipe, drainage pipe and guttering require a specialist courier, and they charge a premium for this service.
Delivery costs are based on product availability and delivery within the UK Mainland. Delivery to the Scottish Highlands and Islands may incur additional costs, if applicable, these will be given in the checkout after a delivery postcode is entered.
*We don’t currently offer a delivery service to Northern Ireland.
You can read more about our delivery service
here.